New Dragon Fire Performance Complete Tune Up Set EFI Ignition Distributor Coil and Plug Wires For 1985-1993 Ford Mercury Lincoln 5.0L V8

•MANUFACTURER: Dragon Fire Performance
•Compatible with 1985-1993 Ford Mercury Lincoln 5.0L V8 **Be Sure to Check for Correct Fitment Using the Information Below.
•FEATURES Designed with performance and reliability in mind, low Ohm performance ignition wires, performance ignition distributor, precision molded thermoplastic to resist fracturing and cracking from constant heat cycling, brass terminals, extra tight plug wire boot fitment, OE grade primary & secondary bobbins with premium copper windings to ensure peak performance under load, extra tight plug wire boot fitment, all connections are watertight and weatherproof, tested and ensured to match OE fit, only premium grade materials used for long service life.
•DIRECT Factory Fit and Ready for Installation Straight Out of The Box
•EASY DIY Plug and Play Install. Perfect for any professional or weekend mechanic.

When it comes to replacing your ignition system, trust in Dragon Fire Performance’s EFI distributor kits. With all-in-one construction installation is a breeze for any DYI weekend or professional mechanic. Dragon Fire Performance EFI Distributor kits are simply the best choice over higher priced ignition systems and cheap Chinese knockoffs. All distributors are carefully assembled using only the highest quality parts available. For a long-lasting dependable ignition system for street and track use. All Dragon Fire Performance EFI ignition distributors feature CNC machined aluminum housings for an exact OEM fit with corrosion free durability. Also includes hardened steel shaft, precision upper and lower bushings, brass terminals, and direct replacement drive gear. At the core of the kit are high performance plug wires featuring a strong Kevlar core with a low resistance spiral wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC, RFI/EMI Suppression, extra thick silicone, and EPDM insulation sleeve for superior protection against voltage leaks and engine heat. Terminals protected by extra thick high-temp silicone boots to ensure optimal spark delivery and extended service life. Heat Rated to 600° F. Also include in your set is AIP Electronics ignition coil. With a High-temp exterior coil housing construction to prevent voltage leaks and RFI interference, OE grade primary & secondary bobbins with premium copper windings to ensure peak performance under load. Ready for installation straight out of the box. Comes Complete as pictured. *See Fitment Guide and part numbers to confirm this is the correct part before purchase.*

** Emissions Note: For sale and use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it is a direct or consolidated replacement part.

Fitment

1985-1991 Ford Bronco 5.0L w/ Steel Gear
1986 Mercury Capri 5.0L w/ Steel Gear
1987-1991 Mercury Colony Park 5.0L w/ Steel Gear
1986-1987 Lincoln Continental 5.0L w/ Steel Gear
1986-1988 Mercury Cougar 5.0L w/ Steel Gear
1987-1991 Ford Country Squire 5.0L w/ Steel Gear
1986-1991 Ford F-150 5.0L w/ Steel Gear
1986-1991 Ford F-250 5.0L w/ Steel Gear
1986-1991 Mercury Grand Marquis 5.0L w/ Steel Gear
1986 Ford LTD 5.0L w/ Steel Gear
1987-1991 Ford LTD Crown Victoria 5.0L S
1986-1992 Lincoln Mark VII 5.0L w/ Steel Gear
1986-1993 Ford Mustang 5.0L GT; w/ Steel Gear
1986-1990 Lincoln Town Car 5.0L w/ Steel Gear
1987-1991 Ford Country Squire 5.0L w/ Steel Gear

Part Numbers

FD17
E6AEI2127DA
E6AZ12127D
E6SZ12127E
M-12259-R301
M12259R301
E2FZ-12029A
E3FZ-12029A
E73F-12029-AB
E73Z-12029A
F32Z-12029A
F5FZ-12029A
F5PZ-12029A
F5ZU-12029AA
F5ZZ-12029-A
F7PZ-12029A
F7PZ-12029AA
FS15-18-10X
ZZM1-18-100
ZZM4-18-100
12321405
12336833
19017194
F-503
F-1953
DG-325A
DG-325ADP
E1EF12029AA
E3EF12029AA
E73F12029AA
E2EF12029AA
CLS1069
FD478
5C1116
GC407
C839
178-8217
E92
C-502