Tune Up Set Complete With Hall Effect Ignition Distributor Low Ohm Plug Wires and Coil For 1989-1994 Mazda B2600 MPV 2.6L L4

•MANUFACTURER: AIP Electronics
•Compatible with 1989-1994 Mazda B2600 MPV 2.6L L4 **Be Sure to Check for Correct Fitment Using the Information Below.
•FEATURES Designed with performance and reliability in mind. Includes ignition distributor and Dragon Fire low ohm ignition wires. Precision molded thermoplastics to resist fracturing and cracking from constant heat cycling, brass terminals, extra tight plug wire boot fitment, OE grade primary & secondary bobbins with premium copper windings to ensure peak performance under load, all connections are watertight and weatherproof, Tested and ensured to match OE fit, only premium grade materials used for a long service life.
•DIRECT Factory Fit and Ready for Installation Straight Out of The Box
•EASY DIY Plug and Play Install. Perfect for any professional or weekend mechanic.

Restore proper spark to your vehicle with this Brand-New AIP Electronics tune up kit. AIP Electronics tune up kits deliver quality craftsmanship and long-term reliability. Our Ignition kits make all tune-ups a snap. No need to search around for each part required and dealing with multiple sellers. Have peace of mind making a single purchase from a trusted parts supplier with over 10 years’ experience. Complete with ignition distributor and low ohm plug wires. At the core of the kit are high performance plug wires featuring a strong Kevlar core with a low resistance spiral wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. Delivering the power is AIP Electronics premium ignition distributor and coil. Featuring electronics designed to meet OEM specification. Comes complete with cap, rotor, module, coil, and all necessary timing/position sensors. High-temp exterior coil housing construction to prevent voltage leaks and RFI interference, OE grade primary & secondary bobbins with premium copper windings to ensure peak performance under load. These parts are direct OEM fit replacement parts and is ready for installation straight out of the box. Perfect for replacing your old worn-out distributor. Comes Complete as pictured. *See Fitment Guide for part number and to confirm this is the correct part before purchase.*

** Emissions Note: For sale and use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it is a direct or consolidated replacement part.

Fitment

1989-1993 Mazda B2600 2.6L L4 T2t52971a Hall Effect (external Coil)
1989-1994 Mazda MPV 2.6L L4 T2t52971a Hall Effect (external Coil)

Part Numbers

MZ29
T2T52971
G60918200A
G60918200B
T2T52971A
G60918200R0B
3135465
31-35465
8435465
84-35465
DST38465
T38465
F2691810X
F269T1810X
B6S718100
B6S71810XA
50095
5C1120
UF221
DGE447
DGE448
F507
F511
8892132
GN10391
IC134SB
52-1983
U1036
26020006
CLS1119
UF-221
E633
IC134
178-8219
C-680
C-649
C649